{"title":"Sistemas de perfiles LED","description":"\u003cp\u003eLos sistemas de perfiles LED ofrecen una solución de iluminación versátil y elegante tanto para espacios residenciales como comerciales. Conocidos por su eficiencia y estética moderna, estos sistemas son ideales para crear iluminación ambiental o de trabajo. Pueden integrarse perfectamente en techos, paredes o muebles, proporcionando un aspecto aerodinámico mientras ofrecen una iluminación de alta calidad. Ya sea propietario de una vivienda o diseñador de iluminación, los sistemas de perfiles LED ofrecen flexibilidad y personalización para adaptarse a cualquier preferencia de diseño.\u003c\/p\u003e","products":[{"product_id":"node-lighting-ground-recessed-profile-kit-2m-length-cw-profile-diffuser-2-end-caps","title":"Node Lighting LED Profile Profile Kit","description":"\u003cp\u003eNode Lighting LED Profile Profile Kit is a ground-recessed LED profile from the LED Profile range by Node Lighting. The kit is supplied as a linear aluminium channel intended to house LED strip lighting and create a neat, recessed run of light suitable for architectural details and accent runs.\u003c\/p\u003e\u003cp\u003eThe profile has a slim, rectangular geometry with longitudinal grooves and a central U-shaped channel to accept LED tape; the kit includes a 2m anodised aluminium channel, 2m opal diffuser, two end caps and four mounting brackets. The opal diffuser snaps into the profile to soften and homogenise the light, helping to reduce visible LED points and improving balance across the run.\u003c\/p\u003e\u003cp\u003eConstructed from anodised aluminium, the extrusion acts as both a protective housing and a heat sink for LED strips, while the opal diffuser is designed to provide controlled diffusion and reduce glare. The profile’s flat base and included brackets make for stable recessed mounting in linear runs.\u003c\/p\u003e\u003cp\u003eLight delivery is linear and directional along the length of the channel; the central channel is intended for standard LED tape installations so you can achieve discreet accent or pathway illumination with reduced shadowing and consistent ambience. The diffuser produces a softened light output suitable for integration into cabinetry, floors or architectural reveals.\u003c\/p\u003e\u003cp\u003eThe kit is specified with an IP65 rating, providing protection for installations where water jets or outdoor exposure to weather are a consideration; the ground-recessed design suits applications that need a robust, sealed linear solution. Note which LED tape, driver or dimming system you plan to use so they integrate correctly with the channel and diffuser.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we frame this profile as a practical way to achieve considered linear lighting without guesswork. The Node Lighting LED Profile Profile Kit gives clarity in specification, project-friendly components for straightforward installation and the durable materials to deliver long-term performance and professional assurance.\u003c\/p\u003e","brand":"Node Lighting","offers":[{"title":"Default Title","offer_id":49400522146128,"sku":"20210274","price":74.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/LS2126_Image.jpg?v=1775271214"},{"product_id":"node-lighting-solderless-connector-ip65-pcb-to-2core-cable","title":"Node Lighting LED Accessories Power Feed Cable","description":"\u003cp\u003eThe Node Lighting LED Accessories Power Feed Cable is a purpose‑designed power feed assembly for LED profile systems. Supplied by Node Lighting of Northern Ireland, the cable provides a neat connection between a power source and an LED strip housed within an architectural profile and is rated IP65.\u003c\/p\u003e\u003cp\u003eThe assembly comprises a flexible white‑insulated two‑core cable with red and black internal conductors and a white plastic connector housing engineered to interface with compatible LED profile components. Its low‑profile form is intended for discreet integration into architectural mounting channels.\u003c\/p\u003e\u003cp\u003eThe cable sheath is printed with full technical markings, including H03VV‑F 2X0.5mm² and European certification marks such as VDE, KEMA‑KEUR and CEBEC, reflecting the product's compliance with recognised electrical standards. A flat white mounting base with a central screw fixing is included to secure the connection point within an installation.\u003c\/p\u003e\u003cp\u003eAs a power feed the component carries electrical supply to the LED strip rather than producing light; the red and black colour coding simplifies polarity identification during installation and pre‑stripped, tinned ends allow for straightforward hard‑wiring. The IP65 rating makes it suitable where protection against dust and water jets is required.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward: the connector snaps to compatible profile components and the tinned lives are prepared for connection to a suitable LED driver or power supply. The mounting base gives a secure fixing point; check compatibility with your chosen profile and driver before installation.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we describe products like this to help you make a considered, design‑led choice. The Power Feed Cable is a practical, standards‑led accessory that reduces uncertainty on site; our guidance and specification notes aim to give professional assurance and project‑friendly clarity so the finished lighting performs reliably and looks intentional.\u003c\/p\u003e","brand":"Node Lighting","offers":[{"title":"Default Title","offer_id":49403202437456,"sku":"20210289","price":8.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/STBX208-ETWA020_Image.jpg?v=1775321601"},{"product_id":"node-lighting-neon-silicone-end-cap","title":"Node Lighting Neon End Cap Kit","description":"\u003cp\u003eThe Node Lighting Neon End Cap Kit is a purpose-made end-cap set for LED profile systems from the Neon range by Node Lighting. The kit is designed to provide a tidy, finished termination for Neon aluminium extrusions and to protect the internal LED strip.\u003c\/p\u003e\u003cp\u003eThe two rectangular caps are formed to slide over the ends of a matching profile in a push-fit or friction-fit manner. One cap features a small cylindrical port for cable entry; the other is a solid termination cap, enabling a live and a blank end arrangement.\u003c\/p\u003e\u003cp\u003eBoth components have a matte white finish and a minimalist form intended to blend with white extrusions and mounting surfaces. The construction is clean and functional, prioritising discreet wiring and a seamless edge detail.\u003c\/p\u003e\u003cp\u003eFunctionally the kit seals the profile ends, reduces dust ingress to the strip and provides an organised cable exit via the integrated port. The off-centre cable port keeps wiring discreet and helps maintain an uninterrupted linear aesthetic.\u003c\/p\u003e\u003cp\u003eThe caps are supplied as a two-piece kit and are intended to be used with compatible Neon aluminium profiles; they do not include LED strips, drivers or the profile itself. Installation is by push-fit onto the profile ends. The product is covered by a 5 Year Warranty.\u003c\/p\u003e\u003cp\u003eLighting Design Online recommends these end caps where a restrained, finished edge and neat cable management are important to the design. We provide clear specification support and project-friendly advice to ensure the Neon End Cap Kit integrates correctly with your profile system, giving a reliable, high-quality result without guesswork.\u003c\/p\u003e","brand":"Node Lighting","offers":[{"title":"Default Title","offer_id":49403950432592,"sku":"20210283","price":2.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/3020289_-_Image.jpg?v=1775335907"},{"product_id":"node-lighting-neon-aluminium-profile-25mm-length","title":"Node Lighting Neon Profile Mounting Clips","description":"\u003cp\u003eNode Lighting Neon Profile Mounting Clips from Node Lighting are a compact accessory designed to secure aluminium LED channels to a mounting surface. The Neon clips are intended for use with compatible LED extrusion profiles where a discreet fixing is required.\u003c\/p\u003e\u003cp\u003eThe clips have a U-shaped rectangular form with a flat base and two parallel side walls, creating a low-profile bracket that sits behind the profile. The metallic, matte-silver appearance matches standard aluminium extrusions and helps maintain clean sightlines.\u003c\/p\u003e\u003cp\u003eManufactured from extruded aluminium, each clip features internal longitudinal ridges and retaining lips that provide a snap-fit interface to grip the outer edges of a compatible LED extrusion. A central pre-drilled aperture in the base accepts a screw for mechanical attachment.\u003c\/p\u003e\u003cp\u003eUsed with an aluminium channel, these clips enable the profile to deliver continuous linear light while keeping fixings out of view, preserving clarity and balance in the finished illumination. They are appropriate wherever concealed, minimal fixings are important to the scheme.\u003c\/p\u003e\u003cp\u003eInstallation is by screw-fix through the central hole; choose a screw type and length suited to the substrate. The clips are supplied as a pair and come with a 5 Years Warranty from the manufacturer. No information about included screws or other fixings is specified in the supplied data.\u003c\/p\u003e\u003cp\u003eAs lighting designers we specify simple, reliable accessories because they shape the outcome as much as the luminaire. These mounting clips remove uncertainty around discreet installation, backed by professional assurance and project-friendly detail so the finished result reads as intended: clean, considered and durable.\u003c\/p\u003e","brand":"Node Lighting","offers":[{"title":"Default Title","offer_id":49404209496400,"sku":"20210280","price":1.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/AS-NMS1217A-25_Image.jpg?v=1775344592"},{"product_id":"node-lighting-solderless-connector-ip20-pcb-to-2core-cable","title":"Node Lighting LED Accessories Solderless LED Strip Connector","description":"\u003cp\u003eThe Node Lighting LED Accessories Solderless LED Strip Connector is a compact connector from Node Lighting designed for LED profile systems and profile kits. Its transparent, low-profile housing is intended for joining LED tape runs inside narrow aluminium profiles without soldering.\u003c\/p\u003e\u003cp\u003eForm is purposeful: a two-part hinged body snaps shut to lock an LED strip or wire firmly against the internal contacts. The slim footprint and clear casing allow installation within confined profiles while permitting visual verification of placement.\u003c\/p\u003e\u003cp\u003eConstruction uses a rigid transparent plastic housing with internal metal contact pins visible through the casing; the pins have a copper- or brass-coloured finish. A snap-lock mechanism provides a positive mechanical grip and the internal piercing pins are designed to penetrate insulation or contact LED strip copper pads.\u003c\/p\u003e\u003cp\u003eBecause the housing is clear and compact it minimises light blockage and reduces unwanted shadowing inside a light-emitting profile. The connector provides a secure, solder-free electrical join between LED strip segments or between strip and power conductors, enabling rapid field modification and repairs.\u003c\/p\u003e\u003cp\u003eThis connector is tool-free to install and intended for use inside aluminium LED profiles; confirm compatibility with your strip width and pad arrangement before specifying. Node Lighting supplies a 5 year warranty for this accessory.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we present this connector as a pragmatic component for considered LED profiles. Its design-led simplicity reduces installation uncertainty; our team can advise on compatibility, layout and project-friendly detailing so the finished scheme achieves clarity, durable performance and the right lighting outcome.\u003c\/p\u003e","brand":"Node Lighting","offers":[{"title":"Default Title","offer_id":49404588556624,"sku":"20210288","price":19.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/TXB208-NOTA012_Image.jpg?v=1775355550"},{"product_id":"node-lighting-solderless-connector-ip20-pcb-to-pcb","title":"Node Lighting LED Accessories Profile Kit Connector","description":"\u003cp\u003eThe Node Lighting LED Accessories Profile Kit Connector is a transparent, solderless connector designed for LED profile systems. Offered as part of Node Lighting's accessories range, it provides a neat, professional join for flexible LED strips used in aluminium channels and profile kits.\u003c\/p\u003e\u003cp\u003eThe connector is engineered with an ultra-slim form to fit inside narrow profile tracks, keeping joins discreet and out of sight. Its clear body minimises visual impact so the join does not interrupt the line of light.\u003c\/p\u003e\u003cp\u003eConstructed from a transparent plastic housing with internal chambers and metallic contact teeth, the connector establishes both a mechanical and electrical connection without soldering. The multi-tiered internal geometry secures conductors reliably within a compact package.\u003c\/p\u003e\u003cp\u003eBecause of its clear construction and low profile, the connector maintains maximum light transmission and reduces visible shadowing where strips meet. It is intended for joining flexible LED strips within aluminium profiles and for projects where a tidy, unobtrusive finish is required.\u003c\/p\u003e\u003cp\u003eInstallation is solder-free: a snap-on or pressure-fit engagement positions the strip conductors into the metallic contacts. The connector is supplied as a component for profile systems; lamps, drivers and mounting profiles are not included. The product is covered by a five-year manufacturer warranty.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we present this connector as a practical detail that helps deliver the right lighting outcome: a clean visual line, dependable electrical continuity and a finish that respects the design intent. We combine design-led guidance with project-friendly support and an emphasis on quality construction to help you specify with confidence.\u003c\/p\u003e","brand":"Node Lighting","offers":[{"title":"Default Title","offer_id":49404589310288,"sku":"20210287","price":17.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/TBB208-NOTA_Image.jpg?v=1775355563"},{"product_id":"node-lighting-neon-solderless-power-feed-connector-ip67-left-connection","title":"Node Lighting Neon Profile Power Connection Kit","description":"\u003cp\u003eThe Node Lighting Neon Profile Power Connection Kit is a profile kit from Node Lighting that provides a solderless link between a standard mains supply and LED profile lighting. It is intended for use where a neat, modular end connection is required to feed LED strip inside an aluminium profile.\u003c\/p\u003e\u003cp\u003eThe kit is formed from a flexible white power cord with a standard two‑prong plug, a pair of metal pins for strip termination, a metallic U‑shaped connector bracket with integrated screw terminals, a clear rectangular protective sleeve and a small spacer\/seal piece. The components are arranged to sit at the profile end and form a compact assembly.\u003c\/p\u003e\u003cp\u003eConstruction uses white plastic for the cable insulation, a transparent plastic sleeve for visual inspection and silver‑toned metal for the electrical connector and screw terminals. These choices make the connection straightforward to inspect and maintain while remaining visually discreet within a profile end cap.\u003c\/p\u003e\u003cp\u003eFunctionally the kit supplies mains power to an LED strip: the dual metal pins are intended for insertion into a compatible strip or connector and the screw terminals allow secure manual wiring where required. The clear sleeve and bracket form a protected housing that keeps the electrical interface enclosed and visible for quick checks.\u003c\/p\u003e\u003cp\u003eInstallation is solderless; the two‑prong plug enables direct connection to a standard wall outlet and the integrated screw terminals simplify on‑site wiring. The kit is designed to integrate with LED profile end housings — check that the profile and strip connector types match the components supplied. The product is covered by a 5 year warranty.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we position products like this Neon profile kit as practical, design‑minded components that remove uncertainty at installation. We offer project‑friendly advice to ensure the kit integrates with your chosen profile and strip, and we highlight build quality and clear connection details so the finished installation performs reliably over time.\u003c\/p\u003e","brand":"Node Lighting","offers":[{"title":"Default Title","offer_id":49405234676048,"sku":"20210282","price":14.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/3035024_-_Image_-_as-nms1217hl0-fl.jpg?v=1775364948"},{"product_id":"node-lighting-neon-solderless-power-feed-connector-ip67-bottom-connection","title":"Node Lighting Neon Profile Kit","description":"\u003cp\u003eNode Lighting Neon Profile Kit is a compact accessory for LED profile systems, combining a solderless electrical connector, a pre-wired power lead and a neat end-cap finish. Designed to power and finish LED tape installations, the kit is intended for use where a discreet termination and reliable connection are required.\u003c\/p\u003e\u003cp\u003eThe kit's form is straightforward and functional. It includes a white, flexible power cable terminating in a rectangular connector housing, a U-shaped metallic connector with internal rows of gripping pins, and a transparent plastic cap that fits over the profile end.\u003c\/p\u003e\u003cp\u003eComponents are a mix of plastic and metal selected for practical installation cues: the visible internal pins provide an electrical grip on LED tape while the side-mounted tab or screw on the metal connector secures the mechanical join. The neutral white, transparent and silver finishes keep the termination visually discreet.\u003c\/p\u003e\u003cp\u003eLight is preserved at the profile ends by the transparent cap, which shields the connector without obstructing light output. The solderless connector is intended to deliver power to LED tape cleanly, making the kit suitable for linear ambient or accent runs where a tidy termination matters.\u003c\/p\u003e\u003cp\u003eInstallation notes: the connector employs a mechanical, solderless connection and a side-mounted fastening to lock the LED tape in place, while the transparent cap slides over the profile end to conceal components. The product data does not list a driver or transformer, so these should be specified separately where required. The kit is supplied with a five-year warranty.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we present this Node Lighting Neon Profile Kit as a practical, design-led solution for finishing LED profiles. We focus on clarity and project-friendly detail so you can specify with confidence, supported by practical assurance of build quality and a considered outcome for the finished installation.\u003c\/p\u003e","brand":"Node Lighting","offers":[{"title":"Default Title","offer_id":49405234741584,"sku":"20210281","price":14.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/3025076_-_Image_-as-nms1217hb0-fl.jpg?v=1775364952"},{"product_id":"node-lighting-neon-aluminium-profile-1000mm-length","title":"Node Lighting Neon LED Profile Kit","description":"\u003cp\u003eThe Node Lighting Neon LED Profile Kit is a precision extruded aluminium channel from the Neon range, designed to house and protect LED strip lighting in architectural and furniture applications.\u003c\/p\u003e\u003cp\u003eFormally the profile has a U-shaped section with a flat exterior base and two parallel vertical walls. The minimalist, linear geometry makes it suitable where discrete, continuous runs of light are required and where a clean architectural line is preferred.\u003c\/p\u003e\u003cp\u003eManufactured from extruded metal with a smooth, matte anodised finish in a natural silver-grey tone, the profile is rigid and consistently extruded along its length. The aluminium body also functions as a passive heat sink for LED tape.\u003c\/p\u003e\u003cp\u003eThe interior channel is sized to accommodate standard-width LED strips and the open top accepts a diffuser or cover to protect the LED and soften output for a balanced ambience. The flat base allows straightforward surface mounting to cabinetry, joinery or solid architectural surfaces.\u003c\/p\u003e\u003cp\u003eThis profile is supplied without lamps, drivers or diffusers; these are specified separately to suit your chosen LED strip and control system. Node Lighting offers a five year warranty with this product—please check strip width and diffuser compatibility before specifying and ensure your LED driver and dimming method match the driver requirements of the chosen tape.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we present this profile as a design-first solution for integrated linear lighting. Its architectural finish and thermal performance make it a reliable choice for considered schemes, while our project-friendly guidance helps you specify the right tape, diffuser and control approach for a durable, well-resolved result.\u003c\/p\u003e","brand":"Node Lighting","offers":[{"title":"Default Title","offer_id":49407080431952,"sku":"20210279","price":10.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/AS-NMS1217A-1000_Image.jpg?v=1775371845"},{"product_id":"node-lighting-neon-solderless-joiner-ip67","title":"Node Lighting Neon Profile Kit Connector","description":"\u003cp\u003eNode Lighting Neon Profile Kit Connector is a purpose-made profile accessory for Neon LED profile systems. The component is a low-profile, end-to-end joiner intended to maintain continuous linear runs of LED strip lighting in architectural installations.\u003c\/p\u003e\u003cp\u003eThe connector is shaped as a rectangular housing with open ends and a central partition to accept two aligned profile segments. Its compact form is designed for unobtrusive installation within slim aluminium or plastic profiles.\u003c\/p\u003e\u003cp\u003eThe housing is moulded from translucent or white plastic and contains parallel metallic contact strips. These internal contacts provide the electrical interface for LED strips while the housing gives mechanical alignment for each joint.\u003c\/p\u003e\u003cp\u003eUsed between two linear LED segments, the connector establishes both the electrical and mechanical connection required for continuous lighting runs. The translucent housing allows visual inspection of the internal connection and the internal metal pins are arranged to match standard LED strip contact layouts.\u003c\/p\u003e\u003cp\u003eInstallation is solderless, providing a straightforward end-to-end join without soldering; the set also includes two small plastic blocks that act as securing wedges or end caps to finish the joint. This is a dedicated profile accessory — drivers, lamps or profile channels are supplied separately.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we present this connector with clear specification and practical advice so you can integrate linear Neon runs with confidence. Our guidance focuses on the right outcome for your design, backed by professional assurance and project-friendly support to help avoid rework and achieve a clean, enduring installation.\u003c\/p\u003e","brand":"Node Lighting","offers":[{"title":"Default Title","offer_id":49407119982928,"sku":"20210284","price":11.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/3021976_-_Image.jpg?v=1775370734"},{"product_id":"node-lighting-furniture-recessed-profile-kit-2m-length-cw-profile-diffuser-2-end-caps","title":"Node Lighting LED Profile Profile Kit","description":"\u003cp\u003eThe Node Lighting LED Profile Profile Kit is a recessed LED profile from Node Lighting's LED Profile range, engineered for furniture, under-shelf and directional corner installations. The kit brings a clean architectural extrusion together with an opal diffuser to deliver considered, low-glare illumination.\u003c\/p\u003e\u003cp\u003eThe profile is a long, linear aluminium extrusion with a precise geometric cross-section and external cooling fins, designed to be recessed or mounted so light is directed where it is needed. The kit is supplied as a complete 2m length and includes the anodised aluminium channel, a 2m opal diffuser, 2 end caps and 4 mounting brackets for secure installation.\u003c\/p\u003e\u003cp\u003eConstructed from anodised aluminium with a neutral matte silver finish, the extrusion uses longitudinal fins and internal hollows to improve thermal performance and provide discreet wire management. The internal triangular chamber and recessed channel reflect an architectural approach to form and function.\u003c\/p\u003e\u003cp\u003eDesigned to house standard LED strip lighting, the profile protects the strip while the opal diffuser softens emission to reduce strip visibility and create a balanced wash of light. The angled geometry lends itself to corner-mount situations or applications that require directional under-shelf task and ambient illumination.\u003c\/p\u003e\u003cp\u003eThe kit includes the 2m anodised aluminium channel, 2m opal diffuser, 2 end caps and 4 mounting brackets; please note the LED strip, driver or transformer are not included. The product is covered by a 5-year warranty from Node Lighting.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we treat products like this as part of a layered lighting solution: the Node Lighting LED Profile Profile Kit gives you a reliable, design-led way to integrate strip lighting into furniture and joinery. We combine clear technical detail with practical project advice so you can specify with confidence, knowing the outcome will be both visually calm and technically sound.\u003c\/p\u003e","brand":"Node Lighting","offers":[{"title":"Default Title","offer_id":49407590105424,"sku":"20210276","price":43.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/LE2409_Image_1.jpg?v=1775369920"},{"product_id":"node-lighting-plaster-in-wall-wash-profile-kit-2m-length-cw-profile-diffuser-2-end-caps","title":"Node Lighting LED Profile Profile Kit","description":"\u003cp\u003eThe Node Lighting LED Profile Profile Kit from the LED Profile range is an extruded aluminium extrusion designed to house LED light strips within a recessed architectural channel. Its long, linear form and central recessed channel make it suitable for continuous ceiling or wall runs where discreet linear illumination is required.\u003c\/p\u003e\u003cp\u003eThe profile's design includes wide, flat lateral flanges intended for embedding and plastering to achieve a trimless finish. Internal side grooves and integrated clips provide a snap-fit method for attaching a diffuser, while the deep rectangular recess allows the light source to be set back from the finished surface.\u003c\/p\u003e\u003cp\u003eConstructed from extruded aluminium with a matte white powder-coated finish, the profile offers a rigid, lightweight support and a clean painted surface that can be plastered to conceal edges. The internal floor of the central channel provides a broad, flat surface for securing adhesive-backed LED tape.\u003c\/p\u003e\u003cp\u003eSetting the LED strip back into the deep channel assists in reducing direct glare and helps produce softer, more diffuse linear light suitable for both ambient and accent applications. Diffuser choice and tape selection will determine the final softness and output for your run.\u003c\/p\u003e\u003cp\u003eThe extrusion is intended to be embedded in a substrate such as drywall using the wide flanges and to accept a clip-in diffuser via the integrated grooves and clips. Check the product listing or technical sheet for details on compatible diffuser profiles, recommended LED tape widths and included accessories. Node Lighting supplies this product with a five year warranty.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we present this extrusion as a design-led solution for achieving clean, continuous linear lighting. Our guidance focuses on selecting the correct LED tape, diffuser and installation method to control glare and ensure longevity, combining clarity and project-friendly support so the finished lighting feels considered and performs reliably.\u003c\/p\u003e","brand":"Node Lighting","offers":[{"title":"Default Title","offer_id":49409068892496,"sku":"20210285","price":134.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/ALS-LR3943FDXWS2000-BC_Image.jpg?v=1775385423"},{"product_id":"node-lighting-silicone-end-cap-suitable-for-low-high-output-ip67-led-strip","title":"Silicone end cap suitable for Low \u0026 High Output IP67 LED Strip","description":null,"brand":"Node Lighting","offers":[{"title":"Default Title","offer_id":49409404272976,"sku":"20210290","price":2.1,"currency_code":"GBP","in_stock":true}]},{"product_id":"flua-lari-s-l-1500-pro-ceiling-recessed-profile-in-sandy-black","title":"Flua Lari Plastered-in LED Profile System","description":"\u003cp\u003eThe Flua Lari Plastered-in LED Profile System is a purpose-made extrusion by Flua for recessed, trimless linear lighting in interiors. Part of the Lari range, this profile is intended to house LED strip lighting so the fixture sits flush within the building fabric.\u003c\/p\u003e\u003cp\u003eForm follows function: the profile has a central U-shaped channel with wide lateral wings that are designed to be bonded into plaster. The pictured version is a 1.5m matte black extrusion, a choice that gives a contemporary, architectural line in the ceiling or wall plane.\u003c\/p\u003e\u003cp\u003eConstructed as an extruded metal section, the profile shows a rigid, consistent cross-section with fine longitudinal ridging on internal faces and wing surfaces. The wings include recessed points that allow mechanical fixing before plastering to achieve a seamless, zero-trim appearance.\u003c\/p\u003e\u003cp\u003eThe central channel is dimensioned to accept LED strips and room for a diffuser, allowing linear ambient or accent runs when populated with the appropriate strip and cover. Note the product carries an IP20 rating, so it is intended for dry interior zones and not suitable for bathrooms or outdoor locations.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward for a tradesperson familiar with plaster-in systems: fix the profile using the recessed fastening points, run the LED strip and wiring (LEDs and driver are not supplied), and finish the wings with plaster to conceal the edge. The manufacturer provides a 1–5 year warranty as standard; confirm strip dimensions and driver compatibility before specifying.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we treat profiles like architectural details. The Flua Lari system helps create a calm, continuous line of light that reads as part of the room, not a separate object. We provide impartial, project-friendly guidance to ensure the profile, strip width and driver produce the right ambience with clarity and long-term assurance.\u003c\/p\u003e","brand":"Flua","offers":[{"title":"Default Title","offer_id":49409594360144,"sku":"20210328","price":46.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/2610Image.jpg?v=1775393063"},{"product_id":"node-lighting-surface-mount-profile-kit-2m-length-cw-profile-diffuser-2-end-caps-4-mounting-brackets","title":"Node Lighting LED Profile Kit","description":"\u003cp\u003eThe Node Lighting LED Profile Kit is a surface-mounted aluminium extrusion from the LED Profile range, supplied as a complete 2m kit. It presents a technical, linear form with a white opal diffuser that produces an even run of light suitable for architectural and furniture-integrated applications.\u003c\/p\u003e\u003cp\u003eIts design uses a deep-set internal channel and a snap-fit opal diffuser to reduce glare and soften emissions. The kit is supplied as a 2m anodised aluminium channel with a 2m opal diffuser; options are consistent with a practical, variant-agnostic specification.\u003c\/p\u003e\u003cp\u003eConstructed from anodised aluminium, the profile features pronounced external cooling fins and a contrasting black internal chamber. The fins act as an integrated heat sink to prolong LED life and give the profile a durable, industrial aesthetic.\u003c\/p\u003e\u003cp\u003eThe profile is intended to house LED strip lighting, providing both mechanical protection and diffusion for a more uniform output. The recessed channel positions the strip away from the diffuser to help control brightness and limit direct view of the LEDs.\u003c\/p\u003e\u003cp\u003eThis kit includes a 2m anodised aluminium channel, a 2m opal diffuser, two end caps and four mounting brackets for surface installation. Specifics such as driver inclusion, IP rating or LED strip selection should be confirmed when specifying for a particular application.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we recommend products that help deliver considered, long-lasting results. This aluminium profile kit gives clear specification data, robust thermal management and a restrained form that supports balanced lighting decisions. Our advice focusses on how the part will perform in a complete scheme, helping you specify with clarity and professional assurance.\u003c\/p\u003e","brand":"Node Lighting","offers":[{"title":"Default Title","offer_id":49409608581456,"sku":"20210273","price":16.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/BS1613_Image.jpg?v=1775391096"},{"product_id":"flua-lari-s-corner-l2-inner-corner-in-sandy-black","title":"Flua Lari Plastered-in Profile Corner","description":"\u003cp\u003eThe Flua Lari Plastered-in Profile Corner is an L-shaped corner component from Flua's Lari range, designed for use with plastered-in LED profile systems. It provides a ready-made 90° junction to continue recessed LED strip runs around corners with precision and clean geometry.\u003c\/p\u003e\u003cp\u003eFormally engineered with a mitered 90° joint, the corner features wide lateral wings intended to be embedded in the substrate and plastered over for a trimless finish. The fitting is finished in a uniform matte black coating; the deep black internal surface gives a restrained architectural look when lights are off.\u003c\/p\u003e\u003cp\u003eThe central section is a U-shaped channel sized to accept an LED strip and is compatible with a snap-in diffuser lens to protect the LEDs and soften the light. Pre-drilled holes are provided at the interface ends to allow secure mechanical connection to straight profile lengths using joining pins or screws.\u003c\/p\u003e\u003cp\u003eDesigned for interior, dry environments (IP20), the component facilitates continuous, recessed lighting runs that avoid on-site mitring. A manufacturer warranty is supplied within the stated 1–5 year range; installers should follow plastering and substrate guidance to maintain the trimless appearance.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we recommend this prefabricated corner when you need a considered, project-friendly solution for continuous linear illumination. Our guidance focuses on getting the junction details right — specifying the compatible diffuser, confirming LED strip dimensions and coordinating installer workflow — so the finished result feels balanced and technically assured.\u003c\/p\u003e","brand":"Flua","offers":[{"title":"Default Title","offer_id":52295262503248,"sku":"20210327","price":20.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/1829Image.jpg?v=1775375826"},{"product_id":"node-lighting-corner-mount-profile-kit-2m-length-cw-profile-diffuser-2-end-caps-4-mounting-brackets","title":"Node Lighting LED Profile Corner Profile Kit","description":"\u003cp\u003eNode Lighting LED Profile Corner Profile Kit is a corner-mounted profile system from the LED Profile range by Node Lighting. The kit is intended to house adhesive LED tape in a discreet aluminium channel and provide a neat, diffused light source where wall meets ceiling or beneath joinery.\u003c\/p\u003e\u003cp\u003eThe profile uses a triangular 90-degree extrusion to sit flush into corners and project light at an approximate 45-degree angle. The kit includes a 2m anodized aluminium channel, a 2m opal diffuser, two end caps and four mounting brackets for a ready-to-fit solution.\u003c\/p\u003e\u003cp\u003eManufactured from anodized aluminium with internal hollow chambers, the extrusion combines structural rigidity with efficient heat dissipation for LED strips. The curved opal diffuser is a frosted polymer that snaps into integrated grooves to deliver an even, softened output and a wider beam than a flat lens.\u003c\/p\u003e\u003cp\u003eThe interior channel is sized for adhesive-backed LED tape; the profile protects the strip and evens the light. This kit does not include LED tape, driver or transformer, so these must be specified separately. The extrusion is designed for screw mounting using the supplied brackets and for flush installation in internal corners.\u003c\/p\u003e\u003cp\u003eLighting Design Online recommends this profile when you need a clean, concealed light line that produces balanced ambience and reliable performance. We offer practical guidance on selecting tape density, correct driver specification and installation details so the finished result is graceful, compliant and built to last under a five-year warranty.\u003c\/p\u003e","brand":"Node Lighting","offers":[{"title":"Default Title","offer_id":52295262765392,"sku":"20210275","price":19.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/BG1616C_Image_1.jpg?v=1775329000"},{"product_id":"flua-lari-diffuser-1500","title":"Flua Lari Plastered-in LED Profile System","description":"\u003cp\u003eThe Flua Lari Plastered-in LED Profile System is a precision extrusion and diffuser solution from Flua, designed to create a trimless, integrated linear light in walls or ceilings. The Lari profile functions as a plastered-in channel and light-diffusing lens, leaving only the light-emitting surface visible once installed.\u003c\/p\u003e\u003cp\u003eFormally the profile is a long, slender rectilinear extrusion with a U-shaped cross section. Its geometry is engineered for architectural integration, allowing continuous runs of light and a minimal visible edge that suits contemporary interiors and clean-lined ceilings.\u003c\/p\u003e\u003cp\u003eThe visible diffuser is a translucent, frosted material that characteristically scatters light for an even appearance. The profile’s uniform thickness and precision-extruded shape ensure consistent light output along its length and help conceal the LED source from direct view.\u003c\/p\u003e\u003cp\u003eInternally the channel is sized to accept flexible or rigid LED tape, and the diffuser reduces the spotting effect of individual LED chips to create a continuous line of light. This product is rated IP20, intended for dry interior zones; it is not suitable for bathrooms or wet areas.\u003c\/p\u003e\u003cp\u003eInstallation is designed to be compatible with a plastered-in aluminium housing: the diffuser shows small snap-in ridges for tool-free engagement with a matching track. This listing is for the profile\/diffuser component only; LED tape, driver\/transformer and the aluminium mounting housing are supplied separately. Dimming behaviour depends on the LED tape and driver chosen. A manufacturer warranty is indicated at 1–5 years.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we present the Lari profile as a straightforward way to achieve quiet, architectural linear light. Our guidance focuses on the design intent — ensuring the chosen profile, LED source and driver work together for clarity of light and consistent output — with professional assurance and project-friendly specification notes to help you deliver the right outcome.\u003c\/p\u003e","brand":"Flua","offers":[{"title":"Default Title","offer_id":52760155062608,"sku":"20210325","price":9.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/2609_Image.jpg?v=1775371187"},{"product_id":"flua-lari-s-i-joint-in-black","title":"Flua Lari Plastered-in Profile Connector","description":"\u003cp\u003eFlua Lari Plastered-in Profile Connector is a compact mounting plate from Flua's Lari range, designed specifically for plastered-in LED profile systems. It is intended to provide a discreet, secure joining or fixing point within architectural lighting assemblies.\u003c\/p\u003e\u003cp\u003eThe connector has an obround or 'stadium' shape with straight sides and semi-circular ends, producing a tidier finish than square-edged brackets. The slim, low-profile form is finished in a uniform matte black to reduce reflectance and help the component blend into recessed installations.\u003c\/p\u003e\u003cp\u003eConstruction is from a rigid material consistent with metal or a high-strength composite, giving the plate the necessary stiffness for structural fixing. The surface is smooth and unadorned, with two symmetrical mounting holes at each end that are countersunk so screw heads sit flush with the plate.\u003c\/p\u003e\u003cp\u003eAs a non-luminous component it integrates invisibly within plastered-in LED profiles, supporting clean sightlines and helping maintain the intended ambience of the lighting scheme. Its primary purpose is to secure or join profile sections rather than to affect light output directly.\u003c\/p\u003e\u003cp\u003eThe product data shows countersunk fixing holes to accept flush-mounted screws; no lamps, drivers or electrical accessories are part of this item. The connector carries the manufacturer's stated warranty of 1–5 years as supplied in the product information.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we treat small components as part of the design outcome. Choosing a low-profile, purpose-made connector like this keeps sightlines clean and installation predictable; our team can advise on fixing details and project compatibility to give professional assurance and straightforward, project-friendly support.\u003c\/p\u003e","brand":"Flua","offers":[{"title":"Default Title","offer_id":52760155193680,"sku":"20210326","price":4.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/1827Image.jpg?v=1775375832"},{"product_id":"flua-lari-s-pro-side-in-black","title":"Flua Lari End Cap for Plastered‑in LED Profile","description":"\u003cp\u003eThe Flua Lari End Cap for plastered‑in LED profile is a pair of mounting components designed to finish and secure linear lighting extrusions in recessed plaster installations. Supplied as a set of two, these end caps are intended for use with the Lari plastered‑in profile system to anchor and tidy linear runs.\u003c\/p\u003e\u003cp\u003eFormally the part has a flat, stepped T‑shaped geometry with a wider anchoring flange and a narrower insertion tab so the component fits into the profile channel and sits flush with the installation. The finish is a consistent matte black, chosen to remain discreet against dark hardware or to minimise visual distraction within a recessed detail.\u003c\/p\u003e\u003cp\u003eConstruction is from a rigid material consistent with metal components used for profile accessories, and the component features two pre‑drilled, horizontally aligned holes to accept mechanical fastenings such as screws or rivets. The design is intentionally low‑profile to reduce bulk within the plastered recess and to preserve the clean line of the extrusion.\u003c\/p\u003e\u003cp\u003eThese end caps do not affect the light source itself but provide a neat termination and secure anchorage for linear LED profiles, helping maintain continuity and alignment across a run. Their discreet form ensures the plastered finish and the linear light remain the visual focus.\u003c\/p\u003e\u003cp\u003eEach pack contains two end caps; fixings are accommodated via the pre‑drilled holes and are not included. The component is rated IP20 for indoor, dry‑zone use only and is supplied with a manufacturer warranty of 1–5 years.\u003c\/p\u003e\u003cp\u003eLighting Design Online recommends matching accessories such as these end caps to the intended profile early in the specification stage so the result is both tidy and robust. We combine design‑led guidance with project‑friendly detail so you can specify confidently and achieve a considered, long‑lasting finish.\u003c\/p\u003e","brand":"Flua","offers":[{"title":"Default Title","offer_id":52760156012880,"sku":"20210329","price":3.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/1826Image.jpg?v=1775375849"}],"url":"https:\/\/www.lightingdesignonline.com\/es\/collections\/sistemas-de-perfiles-led-guia-de-diseno-de-iluminacion.oembed","provider":"Lighting Design Online","version":"1.0","type":"link"}