{"title":"Controladores LED","description":"\u003cp\u003eLos controladores LED (LED drivers) son componentes críticos en cualquier sistema de iluminación LED, ya que proporcionan la regulación de potencia necesaria para garantizar un rendimiento óptimo y una larga vida útil. Estos dispositivos convierten la corriente alterna de alto voltaje en la corriente continua de bajo voltaje que necesitan los LED, protegiéndolos contra sobretensiones y fluctuaciones de energía. Esenciales tanto para proyectos de iluminación residencial como comercial, los controladores LED mejoran la eficiencia energética y ofrecen un control preciso sobre la salida de luz, lo que los hace indispensables para los diseños de iluminación modernos.\u003c\/p\u003e","products":[{"product_id":"marset-ambrosia-dali-driver-35w","title":"Marset Ambrosia LED Driver","description":"\u003cp\u003eMarset Ambrosia LED Driver is an LED driver and power supply housing from Marset's Ambrosia range, designed for architectural lighting where the electronics form part of the fixture's clean profile. The assembly pairs a low-profile rectangular driver box with a vertical cylindrical support stem, presented in a uniform matte finish.\u003c\/p\u003e\u003cp\u003eThe design balances visibility and restraint: an elongated, slim driver housing sits separately from the primary light source and connects via a thin, flexible cable to the top of the vertical stem. The Ambrosia driver is offered in Black and Matt Gold and is available in 35W and 60W output options to suit different luminaire requirements.\u003c\/p\u003e\u003cp\u003eThe build emphasises a minimal architectural language. The top of the vertical stem terminates in a small circular flange for mounting, while the driver box maintains a slim rectangular form that reduces visual clutter in exposed installations.\u003c\/p\u003e\u003cp\u003eFunctionally this unit acts as a remote or surface-mounted power source that converts electrical current to the appropriate voltage for LED components. The visible loop of the connection cable indicates a modular, plug-and-play relationship between the driver housing and the stem-mounted feed, and the arrangement is suited to ceiling-mounted or suspended installations where the driver remains separate from the light engine.\u003c\/p\u003e\u003cp\u003ePlease note the product is supplied with a two-year defects-only warranty. Installation should follow standard electrical practice and the driver should be matched to the intended LED luminaire in terms of wattage and electrical compatibility; confirm compatibility with your chosen luminaire prior to specification.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we treat the Ambrosia LED Driver as a design-led component: it allows you to make a considered decision about where the power electronics sit within a ceiling or suspension scheme, providing clarity of form and a restrained aesthetic. We combine practical project-friendly notes with professional assurance so you can specify confidently for a durable, well-resolved outcome.\u003c\/p\u003e","brand":"Marset","offers":[{"title":"Black \/ 35W","offer_id":49400482070864,"sku":"16041723","price":305.0,"currency_code":"GBP","in_stock":true},{"title":"Black \/ 60W","offer_id":49400481972560,"sku":"16041725","price":385.0,"currency_code":"GBP","in_stock":true},{"title":"Matt Gold \/ 35W","offer_id":49400482038096,"sku":"16041722","price":305.0,"currency_code":"GBP","in_stock":true},{"title":"Matt Gold \/ 60W","offer_id":49400482005328,"sku":"16041724","price":385.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/Marset-Ambrosia-180-Suspension-Black-Canopy.jpg?v=1775302242"},{"product_id":"osram-dali-dimmable-20w-200500ma-nfc","title":"Osram DALI Dimmable LED Driver","description":"\u003cp\u003eThe Osram DALI Dimmable LED Driver is a constant-current LED power supply from Osram's OPTOTRONIC INTELLIGENT line, designed for professional lighting systems that use DALI control and NFC commissioning. It operates from a 220–240 V supply and is intended to deliver stable current to LED fixtures in architectural and decorative installations.\u003c\/p\u003e\u003cp\u003eFormally the unit is an elongated rectangular module with a white central body and signature orange end caps. Two mounting tabs with screw holes allow secure attachment inside luminaires or on flat surfaces; terminal labelling guides wiring for DALI, mains input and LED output.\u003c\/p\u003e\u003cp\u003eThe housing is moulded from rigid plastic and carries detailed technical printing, including the OPTOTRONIC INTELLIGENT brand, wiring diagrams and multiple compliance marks. Orange terminal covers protect the internal terminal blocks and an integrated cable clamp supports both luminaire-mounted and independent installations.\u003c\/p\u003e\u003cp\u003eFunctionally this is a constant-current LED driver with support for DALI dimming protocols and NFC configuration for setup and addressing. Its role is to regulate current to LED loads and to integrate with digital lighting control systems where precise dimming and commissioning are required.\u003c\/p\u003e\u003cp\u003eElectrical details include operation on 220–240 V (line range 198–264 V) and compatibility with 50–60 Hz supplies, along with conformity to EN 61347-1, EN 61347-2-13 and EN 62384. The unit meets RI suppression requirements (EN 55015\/CISPR 15) and immunity (EN 61547). IP20 protection guards against ingress of solid objects greater than 12.5 mm. A manufacturer warranty ranges from 3 to 10 years depending on the specific product.\u003c\/p\u003e\u003cp\u003eLighting Design Online recommends this driver when you need a reliable, standards-compliant DALI\/NFC solution for controlled LED installations. We focus on clarity and assurance in specification — providing the technical detail and installation notes you need to make a design-led decision with confidence and consistent long-term performance.\u003c\/p\u003e","brand":"Osram","offers":[{"title":"Default Title","offer_id":49402656031056,"sku":"20210430","price":26.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/4062172114967_Image.jpg?v=1775310150"},{"product_id":"osram-110v-dimmable-100w-24v-led-driver","title":"Osram 1-10V Dimmable LED Driver","description":"\u003cp\u003eOsram 1-10V Dimmable LED Driver is a compact, constant-voltage 24V driver from the OPTOTRONIC family. The 60W unit converts AC mains to a stable 24V DC output and provides dimming control suitable for linear and modular LED installations.\u003c\/p\u003e\u003cp\u003eDesigned with a slim, elongated rectangular housing in white plastic, the driver has cables exiting at each short end and integrated mounting holes at both ends for secure surface fixing. Its low-profile form makes it suitable for slim light boxes, narrow coves or other space‑constrained architectural applications.\u003c\/p\u003e\u003cp\u003eThe casing carries clear technical markings and wiring diagrams. Input is wired for brown and blue mains conductors; the output side presents four control wires (violet, grey, red and black) to support 24V DC delivery and external dimming signals. The unit is rated IP66 for protection against dust and powerful water jets.\u003c\/p\u003e\u003cp\u003eInstallation notes: the driver provides a constant 24V DC output up to 60W and supports 1–10V dimming control as indicated by the product range. Mounting holes are provided for secure fixing; installers should follow the printed wiring diagram on the housing. Warranty varies between three and ten years depending on the specific model and purchase conditions.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we treat a driver as a design decision, not a detail. Choosing a compact, IP-rated 24V driver from Osram OPTOTRONIC helps ensure your low-voltage LED circuits behave predictably, reduce on-site complications and align with professional installation practices. We combine practical specification notes and project-friendly advice so designers and installers can deliver a considered, durable lighting outcome.\u003c\/p\u003e","brand":"Osram","offers":[{"title":"Default Title","offer_id":49404147007824,"sku":"20210467","price":73.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/24_DIM_P.jpg?v=1775344666"},{"product_id":"osram-110v-dimmable-60w-24v-led-driver","title":"Osram 1-10V Dimmable LED Driver","description":"\u003cp\u003eOsram 1-10V Dimmable LED Driver is a 24V constant-voltage power supply from Osram's 1-10V Dimmable range, identified on the housing as OPTOTRONIC OT 60\/220-240\/24 DIM P. It converts mains AC to regulated 24V DC to power LED modules and small strip runs where stable voltage and dimming control are required.\u003c\/p\u003e\u003cp\u003eThe unit uses a slim, elongated rectangular housing with a low-profile form intended for installation in confined spaces such as coves, narrow profiles and service voids. The neutral white finish and compact design make it straightforward to integrate into discreet lighting details.\u003c\/p\u003e\u003cp\u003eConstructed in a white plastic\/acrylic enclosure, the top surface carries a comprehensive wiring diagram and technical data printed clearly on the housing. Pre-installed insulated cables extend from both ends for rapid connection, and labelled wire colours (VIOLET, GREY, RED, BLACK) are provided to assist installation and dimming wiring.\u003c\/p\u003e\u003cp\u003eAs a constant-voltage 24V driver it delivers stable DC output for LED modules; the product label and DIM P designation indicate integrated dimming capability across 1–100%. The printed information on the unit helps identify controls and output connections quickly during installation.\u003c\/p\u003e\u003cp\u003eThe driver is rated IP66, suitable where resistance to dust and high-pressure water jets is needed, and is therefore appropriate for more demanding interior and some exterior-protected applications. Warranty information is manufacturer-specified and ranges from 3 to 10 years depending on the product variant. Installers will find the printed technical details and pre-wired leads useful for on-site wiring and system checks.\u003c\/p\u003e\u003cp\u003eLighting Design Online presents this Osram driver as a practical choice when you need a compact, reliable constant-voltage supply with built-in dimming. Our guidance focuses on specifying the right driver for the intended LED load and environment, offering professional assurance and project-friendly support so the result is durable, easy to install and performs as intended.\u003c\/p\u003e","brand":"Osram","offers":[{"title":"Default Title","offer_id":49404158542160,"sku":"20210466","price":54.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/24_DIM_P.jpg?v=1775344666"},{"product_id":"osram-110v-dimmable-250w-24v-led-driver","title":"Osram 1-10V Dimmable LED Driver","description":"\u003cp\u003eOsram 1-10V Dimmable LED Driver is the OT 60\/220-240\/24 DIM P constant-voltage driver from Osram, designed to power 24V LED lighting systems where compact, reliable control is required.\u003c\/p\u003e\u003cp\u003eThe driver has a slim, elongated rectangular profile housed in a white polymer casing, making it suitable for integration into slim luminaires and narrow mounting voids. The chassis carries clear printed wiring diagrams and technical markings to aid on-site installation.\u003c\/p\u003e\u003cp\u003eConstructed primarily from durable plastics, the unit includes pre-wired black input and output leads. Output wiring is colour-coded (Violet and Red for positive, Grey and Black for negative) and the top surface displays CE, SELV and double-insulation markings for quick verification.\u003c\/p\u003e\u003cp\u003eThis is a constant-voltage 24V DC power supply with dimming functionality marked DIM P and intended for use with 1–10V control systems. It converts mains AC to a regulated 24V DC output suitable for compatible LED modules and strips, with on-chassis wiring information to reduce installation uncertainty.\u003c\/p\u003e\u003cp\u003eThe driver is supplied with an IP67 rating and a narrow profile that suits wet or exposed environments where a compact, sealed power supply is required. Warranty coverage is manufacturer dependent and ranges from 3 to 10 years; consult product documentation for exact terms.\u003c\/p\u003e\u003cp\u003eLighting Design Online treats a driver like this as a design decision: specifying the right control method, protection rating and physical form avoids later compromises. We combine clear technical detail with professional assurance and project-friendly support so you can integrate this Osram driver with confidence into considered lighting schemes.\u003c\/p\u003e","brand":"Osram","offers":[{"title":"Default Title","offer_id":49404212773200,"sku":"20210468","price":108.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/24_DIM_P.jpg?v=1775344666"},{"product_id":"osram-dali-dimmable-80w-24v-led-driver","title":"Osram DALI Dimmable LED Driver","description":"\u003cp\u003eThe Osram DALI Dimmable LED Driver (OT DALI 80\/220-240\/24 1CH G3) is a constant-voltage power supply from Osram's Optotronic Intelligent family, designed to feed 24V LED systems with an 80W capacity. It is intended for indoor, protected locations and integrates DALI digital control for precise dimming and networked lighting schemes.\u003c\/p\u003e\u003cp\u003eForm follows function: the driver has a long, slim rectangular profile to suit low-clearance installations and discreet routing. The unit is finished in a white plastic housing and is offered as a single-channel constant-voltage device; the printed labelling and wiring diagram on the body make installation choices clear.\u003c\/p\u003e\u003cp\u003eConstructed from durable plastics with terminal covers at both ends secured by metal screws, the driver includes clearly marked input (L, N, DALI) and output (24V +\/−) terminals. The housing carries multiple certification marks, including CE, UKCA, DALI-2, SELV, VDE and ENEC, reflecting international compliance and safety testing.\u003c\/p\u003e\u003cp\u003eLight delivery is constant-voltage 24V DC, suitable for running LED strips and low-voltage luminaire arrays up to 80W on a single channel. Dimming is handled via the DALI interface, providing reliable, flicker-free control when used with compatible DALI controllers. Note the product is rated IP20 and is therefore for indoor use only.\u003c\/p\u003e\u003cp\u003eFor installation: wiring diagrams are printed on the housing to guide connections; terminal covers protect wiring and are secured with screws. The driver requires a DALI system for dimming control and is intended for mains input of 220–240V AC. Osram offers a manufacturer warranty from 3 to 10 years depending on the exact model and application—check product-specific documentation for precise terms.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we present this Osram driver as a practical, design-focused component when you need dependable 24V power and intelligent DALI dimming in a scheme. Our guidance focuses on choosing the right driver for your circuit, confirming compatibility with controllers and LED loads, and ensuring a technically sound, long-lasting result with professional clarity and project-friendly support.\u003c\/p\u003e","brand":"Osram","offers":[{"title":"Default Title","offer_id":49404427600208,"sku":"20210428","price":80.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/4062172274364_Image.jpg?v=1775348106"},{"product_id":"osram-dali-dimmable-160w-24v-led-driver","title":"Osram DALI Dimmable LED Driver","description":"\u003cp\u003eThe Osram DALI Dimmable LED Driver is the Optotronic OT\/DALI 160\/220-240\/24 1CH G3 constant-voltage driver from Osram. Designed in Germany, this compact 160W unit delivers a regulated 24V DC output for LED strips and modules and supports DALI-2 digital dimming for intelligent interior lighting schemes.\u003c\/p\u003e\u003cp\u003eThe driver is housed in an elongated, slim rectangular white enclosure that keeps installation neat in service voids and ceiling voids. The top face carries a clear wiring diagram and technical markings; removable terminal covers at each end provide cord grip and strain relief and the casing includes integrated screw-fix mounting holes.\u003c\/p\u003e\u003cp\u003eConstructed from white polycarbonate\/plastic with steel fastenings, the chassis is printed with compliance and safety markings including CE, UKCA, ENEC, DALI-2 and SELV. The build is intentionally functional — clear labelling and removable covers simplify wiring on site.\u003c\/p\u003e\u003cp\u003eFunctionally, the unit converts 220–240V AC mains to a regulated 24V DC output suitable for constant-voltage LED systems up to 160W on a single channel. DALI-2 compatibility provides reliable digital dimming and integration into control systems. Note the unit is rated IP20 and intended for dry, indoor use.\u003c\/p\u003e\u003cp\u003eWiring is via clearly marked primary terminals for L and N and DALI DA control lines, with secondary 24V (+) and LED (-) outputs. The printed wiring diagram on the chassis shows terminal assignments; the terminal covers act as cord grips. For project specification, check controller compatibility and the exact warranty term provided with the product (3–10 years depending on the unit).\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we treat drivers as part of the design decision. Choosing the right constant-voltage driver affects performance, dimming behaviour and installation clarity — we provide the technical detail and project-friendly guidance to ensure the Osram OT\/DALI 160 delivers the intended ambience, reliable control and long-term assurance for considered interiors.\u003c\/p\u003e","brand":"Osram","offers":[{"title":"Default Title","offer_id":49404634693968,"sku":"20210429","price":117.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/4062172274388_Image.jpg?v=1775355827"},{"product_id":"osram-phase-cut-dimmable-75w-24v-led-driver","title":"Osram Phase Cut Dimmable 24V LED Driver","description":"\u003cp\u003eThe Osram Phase Cut Dimmable 24V LED Driver from the OPTOTRONIC OT FIT series is a 24V constant-voltage power supply designed to convert 220–240V AC into a regulated 24.2V DC output. Branded by Osram and made in Germany, this unit is intended for indoor LED lighting installations that require phase-cut dimming compatibility and SELV safety.\u003c\/p\u003e\u003cp\u003eIts form is a flat, rectangular housing in off-white plastic with two integrated mounting tabs for secure installation. The driver is presented with clearly printed technical data and polarity markings; variant-agnostic notes apply where finish or size options exist.\u003c\/p\u003e\u003cp\u003eThe construction uses durable plastics and a visible internal circuit board at the terminal access. Primary and secondary terminals are grouped and labelled for line (L), neutral (N), earth and for two sets of LED outputs (+\/−). A wire-stripping guide printed on the housing specifies 7–8mm preparation and supported wire cross-sections.\u003c\/p\u003e\u003cp\u003eLight delivery is constant-voltage 24.2VDC at a rated power of 75W, making it suitable for LED tape and other 24V LED loads sized to that power. The housing also notes trailing-edge dimmer compatibility for phase-cut dimming systems and carries SELV designation for low-voltage safety.\u003c\/p\u003e\u003cp\u003eInstallation guidance is printed directly on the unit: input 220–240V, rated power 75W, and thermal limits including a tc (maximum case) of 80°C and an ambient range of −20°C to +45°C. The product is CE, ENEC, UKCA, CCC and EAC marked. The IP20 rating designates it for interior, dry locations; follow the printed wiring and mounting instructions during installation.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we present this Osram driver as a practical choice when a considered, design-led 24V supply is required. The clear labelling, dimmer compatibility and recognised compliance marks reduce specification uncertainty, helping you achieve a reliable, long-lasting result while keeping installation and dimming behaviour straightforward and well‑documented.\u003c\/p\u003e","brand":"Osram","offers":[{"title":"Default Title","offer_id":49404664578384,"sku":"20210431","price":43.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/4062172237413_Image.jpg?v=1775356399"},{"product_id":"osram-phase-cut-dimmable-14w-200350ma","title":"Osram Phase Cut Dimmable LED Driver","description":"\u003cp\u003eThe Osram Phase Cut Dimmable LED Driver is a compact constant-current power supply from Osram, designed for linear and recessed LED luminaires. Housed in a white plastic enclosure with bright orange terminal covers, it suits installations where a slim profile is required.\u003c\/p\u003e\u003cp\u003eIts elongated rectangular form and slim profile allow installation inside narrow luminaire housings or decorative profiles. The linear design makes it straightforward to integrate where space is limited.\u003c\/p\u003e\u003cp\u003eConstructed from plastics and acrylic components, the unit features a detailed technical label on the top surface and push-in wire terminals for reliable connections. The orange terminal covers provide a clear visual identifier for wiring points.\u003c\/p\u003e\u003cp\u003eThis constant-current driver offers selectable outputs of 200, 250, 300 and 350 mA via internal DIP switches, with an on-unit configuration table for output power between 8 W and 14 W. It converts 220–240 V mains (50\/60 Hz) to a regulated LED current, and the label indicates compatibility with both leading- and trailing-edge electronic dimmers.\u003c\/p\u003e\u003cp\u003ePush-in terminals accept 0.75–1.5 mm² conductors with an 8–9 mm strip length. The unit carries CE, UKCA and SELV markings and is double insulated; its IP20 rating means it is for dry, indoor locations only. Warranty terms vary between three and ten years depending on the exact model.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we present this Osram driver with the technical detail designers need to specify confidently. We combine design-led guidance with professional assurance and project-friendly information — helping you choose the right driver for a clean, dimmable LED installation and avoid common compatibility pitfalls.\u003c\/p\u003e","brand":"Osram","offers":[{"title":"Default Title","offer_id":49405176316240,"sku":"20210434","price":13.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/4062172286503_Image.jpg?v=1775364242"},{"product_id":"osram-phase-cut-dimmable-150w-24v-led-driver","title":"Osram Phase Cut Dimmable OT FIT 150\/220-240\/24 PC LED Driver","description":"\u003cp\u003eThe Osram Phase Cut Dimmable OT FIT 150\/220-240\/24 PC LED Driver is a 150W constant-voltage driver from Osram. It converts 220–240V mains to a regulated 24.2V DC output intended for 24V LED lighting systems.\u003c\/p\u003e\u003cp\u003eFormally restrained, the unit has a slim, rectangular light-grey plastic housing with technical specification printing on the top face. Push-in terminal blocks sit at one end and colour-coded output terminals make connection and circuit separation straightforward.\u003c\/p\u003e\u003cp\u003eThe casing is moulded plastic with four integrated mounting holes for secure flat-surface fixing. Wiring and regulatory information are printed on the top surface; the unit is rated for a maximum casing temperature (tc) of 80°C and an ambient range of −20°C to +45°C.\u003c\/p\u003e\u003cp\u003eElectrically this is a constant-voltage supply rated 150W with a nominal 24.2V DC output. Secondary outputs are marked with red (LED+) and black (LED−) terminals for multiple 24V LED loads. The driver carries SELV and common international marks and is explicitly compatible with trailing-edge dimmers for brightness control.\u003c\/p\u003e\u003cp\u003eInstallation uses separated primary (L, N, PE) and secondary push-in terminals; wire strip length is specified at 7–8mm and suitable conductor cross-sections are shown on the casing. The unit is IP20, intended for indoor, dry-location installation. Lamps are not supplied. Warranty varies between 3–10 years depending on the product.\u003c\/p\u003e\u003cp\u003eLighting Design Online recommends this Osram driver when you need a compact, clearly specified 24V supply for LED strips or 24V luminaires. The printed wiring diagrams, push-in terminals and dimmer compatibility reduce on-site uncertainty, while our project-focused guidance ensures the specification delivers the right, durable outcome for the scheme.\u003c\/p\u003e","brand":"Osram","offers":[{"title":"Default Title","offer_id":49405208691024,"sku":"20210432","price":73.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/4062172237642_Image.jpg?v=1775364542"},{"product_id":"ecopac-uk-power-non-dimmable-150w-48v-cv","title":"Ecopac UK Power Non Dimmable LED Driver","description":"\u003cp\u003eThe Ecopac UK Power Non Dimmable LED Driver is a compact 150W power supply from Ecopac UK Power, offered in the Non Dimmable range. The product is shown as model ELG‑150‑24A and is intended for robust architectural and outdoor lighting where a stable low‑voltage feed is required.\u003c\/p\u003e\u003cp\u003eIts design is slim and low‑profile with a brushed silver‑grey metal housing that helps with heat dissipation. Integrated mounting tabs with pre‑drilled holes and two heavy‑duty output cables make it straightforward to fit into confined fixture enclosures or remote mounting positions.\u003c\/p\u003e\u003cp\u003eBuilt from a metal enclosure, the driver is rated for protected environments (manufacturer materials reference IP65\/IP67) and carries a dense technical label showing safety and compliance marks. The construction emphasises durability and practical service access for maintenance.\u003c\/p\u003e\u003cp\u003eElectrically the unit provides a stable 24V output at 6.25A (150W) from a 100–240V input and includes an active PFC circuit and a very low no‑load consumption of under 0.5W. It also features a 3‑in‑1 dimming interface, giving flexible control options for dimmable LED installations.\u003c\/p\u003e\u003cp\u003eInstallation is eased by a three‑wire input cable (Line, Neutral, Earth) and a two‑wire output to the LED load; the case includes mounting tabs and visible adjustment\/access points. The technical label identifies the ELG series and accompanying compliance information; ELG series products carry a 5‑year warranty.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we view components like this as part of a considered lighting solution: a compact, well‑specified driver reduces installation risk and helps achieve the intended ambience. We offer straightforward, project‑friendly advice on dimming compatibility, wiring and specification to ensure the right outcome for your scheme.\u003c\/p\u003e","brand":"Ecopac UK Power","offers":[{"title":"Default Title","offer_id":49405210984784,"sku":"20210415","price":119.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/ELG-150-48A-3Y_Image.jpg?v=1775364577"},{"product_id":"osram-non-dimmable-60w-24v-led-driver","title":"Osram Non Dimmable LED Driver","description":"\u003cp\u003eOsram Non Dimmable LED Driver — the ELEMENT 60\/220-240\/24 G2 — is a compact constant-voltage power supply designed for 24V LED installations. The unit’s linear, low-profile form and clear printed markings make it straightforward to identify and specify on site.\u003c\/p\u003e\u003cp\u003eThe driver is housed in a slim rectangular enclosure finished in an off-white\/cream tone with integrated mounting ears and pre-drilled fixing holes for secure surface installation. Two screw-secured terminal covers and a wiring preparation diagram on the casing simplify on-site wiring and polarity checks.\u003c\/p\u003e\u003cp\u003eConstructed from durable plastics, the casing carries extensive technical text and regulatory icons. The terminal covers are reinforced by silver fixing screws and the top surface is printed with certification marks including SELV, CE, CCC, UKCA and BIS.\u003c\/p\u003e\u003cp\u003eElectrically the ELEMENT G2 is a 60W constant-voltage converter: it accepts 220–240V AC input and provides a stabilized 24V DC output. Performance figures include a power factor greater than 0.95 at full load, total harmonic distortion below 15% and an output voltage tolerance under 3%, making it suitable for steady, low-glare LED runs and constant-voltage LED installations.\u003c\/p\u003e\u003cp\u003eThermal and longevity data are printed on the unit: a maximum case temperature (Tc max) of 85°C, an ambient operating range from -20°C to +50°C and a rated lifetime up to 30,000 hours at Tc max or up to 50,000 hours at 10°C below Tc max. The product is supplied in a non-dimmable configuration; terminals on the primary side are marked L and N, and the secondary side is marked + and - for correct polarity.\u003c\/p\u003e\u003cp\u003eLighting Design Online frames this driver as a practical choice when clarity and reliable performance are required. The combination of clear thermal ratings, strong power-factor performance and recognised safety markings helps you specify with confidence for both residential and light commercial LED projects. We focus on the right technical fit so the finished scheme delivers the intended ambience and longevity.\u003c\/p\u003e","brand":"Osram","offers":[{"title":"Default Title","offer_id":49409073316176,"sku":"20210435","price":15.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/4052899605527_Image.jpg?v=1775385442"},{"product_id":"ecopac-uk-power-non-dimmable-100w-48v-cv","title":"Ecopac UK Power Non Dimmable LED Driver","description":"\u003cp\u003eEcopac UK Power Non Dimmable LED Driver is a compact, design‑led constant‑voltage power supply intended for LED strips and fixtures. Supplied in the Non Dimmable range, the unit pairs a slim white enclosure with practical installation details to sit discreetly in architectural cavities or surface‑mounted on service voids.\u003c\/p\u003e\u003cp\u003eThe driver uses an elongated, rounded rectangular form with integrated mounting tabs and pre‑wired cable leads for direct connection. The slim profile is suited to narrow spaces and concealed mounting; the product is offered as a non‑dimmable constant‑voltage unit.\u003c\/p\u003e\u003cp\u003eConstructed with a matte white plastic enclosure and black strain‑relief grommets at the wire exits, the unit carries international safety marks and an IP67 label indicating a sealed finish suitable for damp or outdoor locations. Surface mounting is assisted by the moulded tabs at each end.\u003c\/p\u003e\u003cp\u003eFunctionally this is a 100W constant‑voltage driver providing a regulated 12V DC output for LED loads. The label and specifications indicate universal AC input, Class II isolation (no protective earth), and protective features including 300VAC surge tolerance for 5 seconds. The driver is convection cooled and has completed full‑load burn‑in testing for reliability.\u003c\/p\u003e\u003cp\u003eFor installation the pre‑wired leads (AC input and DC output) simplify wiring; the unit is non‑dimmable and should be installed following local wiring regulations. Its sealed construction and safety approvals make it a straightforward choice where a compact, reliable constant‑voltage supply is required.\u003c\/p\u003e\u003cp\u003eAt Lighting Design Online we place this Ecopac driver in the context of a considered lighting solution: it’s a practical, well‑specified component that removes uncertainty when powering 12V LED strips. We emphasise clarity and technical assurance so designers and installers can specify with confidence and achieve a durable, quality outcome.\u003c\/p\u003e","brand":"Ecopac UK Power","offers":[{"title":"Default Title","offer_id":49409751581008,"sku":"20210414","price":66.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0858\/8145\/4928\/files\/LPV-100-48_Image.jpg?v=1775397893"}],"url":"https:\/\/www.lightingdesignonline.com\/es\/collections\/controladores-led-guia-experta-iluminacion.oembed","provider":"Lighting Design Online","version":"1.0","type":"link"}